Chera Capstan & Turret Combination Lathes

Home ::: The Company ::: Products ::: Quality ::: Contact Us

Products
Automatic Lathe	Automatic Trimming Machines	Capstan & Second Operation Lathe	Clutch Components	M I T Machines	Precision Turned Components

HS Code : 84589903,84589905

	CSO-15/25/30
Max. Bar Size -Round	15/25/30 mm
- Square	10/18/21 mm A/F
- Hexagon	12/22/26 mm A/F
Chuck Dia. Max. (Jaw Opening / Swing)	90 mm / 140 mm
Turret -No. of stations on turret	6
-Turret Bores	19.05 mm dia.
Travel ( Cross / Vertical Slide)	60 mm / 25 mm
Distance between spindle nose and turret face
Maximum / Minimum	245 mm / 75 mm
Threading Capacity	M5 to M14 for ferrous & M5 to M16 for nonferrous
Weight of Machine (Approx.)	375 Kgs.

Standard Accessories : Six-Station turret with indexing mechanism, Single Vertical Slide & Cross slide without tool holder, Mechanical break for spindle, Quick Collet chucking mechanism without collet.
Extra Accessories : Eight-Station turret in place of Six-Station at extra cost, Chuck with key, Automatic threading attachment, Coolant pump, Bar feed.

The Chera Capstan & Turret lathe is designed for chuck work as well as collet work. In chuck work the maximum dia that can be mounted is 90 mm & in collet work 25 mm. It is ideal for manufacturing simple & complex turned parts from both bars & blanks. The blanks can be pre-turned, forged or cast. The simple design allows quick and easy setting of the machine.
The changeover from collet work to chuck work and vice versa is quick and simple as only the spindle nose cap & collet are to be removed and the chuck with the back plate is to be screwed to the nose of the spindle. For change over from chuck work to collet work the procedure is to be reversed.